Deck Hardware & Hinges

Cleats, Bow eyes, Handles, Perko
!
Larger picture

Yacht Cleat

Boat Yacht Cleat, the most popular cleat found on most boats. Available in Chrome Plated Die cast zinc or in 316 Polished Stainless Steel.

Hollow Base Cleat

Cleats
ZAMAK

  • ZAMAK
  • Hollow Base Cleats
  • One of our most popular ZAMAK cleats. Traditional styling with concave profile. Rugged construction, with durable Perma-Plate® finish
    Larger picture

    Nylon Boat Cleat

    Molded Black Nylon cleat, super tuff.

    Stainless Push-Up Cleats

    • These are the HOTTEST NEW cleats on the market today cast from 316L stainless steel. They are a spring loaded style of cleat but they don't have any unsightly buttons to release, merely push on the top of the cleat and it will recess and pop-up and it does the same the same to retract. But that's just the beginning, these cleats feature no exposed hardware, actual studs are cast into the base as well as water drains with no additional cups to buy. The best part is they're the easiest cleat to install anywhere, merely drill four holes, attach the nut and washer, hook up your drain hoses (if used) and you're finished.

    Larger picture

    Bow Eyes

    Boat Bow Eyes

    Chrome Plated Zamac

    1 inch eye, cadmium plated, steel shank, w/ washers and nuts.

    06473- 3/8 inch x 3 inch Single shank

    06474- 3/8 inch x 5 inch Single shank

    06475- 5/16 inch x 4 inch Double shank

    Stainless Steel

    01312- 3/8 inch x 3-1/2inch Double shank

    Larger picture

    Perko Deck Cleat

    Chrome Plated Zinc, Black Plastic Base, Chromalex

    #1306 Open Base Cleat

    #1305 Closed Base Cleat(not shown)

    Larger picture

    Perko Streamline Cleat

    #566 Closed Base Cleat

    Traditional Streamline ,Chrome Plated Zinc

    Larger picture

    Perko Step Plates

    Perko Step Plates

    Chrome Plated Frames.

    Soft Black Plastic Pads

    BoatHookHolders

    Storage Clips

    Storage Clips General Purpose

    Hooks and Holders

    An economical way to hold and store boat hooks, mop handles and other poles. Stainless steel. 2 per package.

    Teak Handrails

    01470

    Boat Hook Holders

    Polished, stamped stainless steel holders keep boat hooks, poles, gaffs, and nets stored within easy reach. For pole diameters up to 1-1/4". 2 per package
    07220

    Motor Box Hinge

    For use on motor box or hatch cover. Take-apart feature allows removal of cover for engine service or bilge access. Chrome-plated brass. Four holes for #10 screws.

    2 per Package

    10634

    Die Cast Chrome Plated Gripper® Cleat

    3"
    10635

    4" Die Cast Chrome Plated Gripper® Cleat

    4"
    10638

    Nylon Gripper® Cleat

    10636

    Die Cast Zinc Plated Gripper® Cleat

    3"
    07198

    Chrome/Brass Strap Hinge PR

    Sand Cast Brass Chrome Plated

    5-5/8" x 1-1/8"     PAIR

    #8 Fastener

    Stainless Steel Strap Hinges

    03978

    Stainless Steel Hatch Latch

    Requires (4) #10 Round Head Screws