STRONGARM 12 Volt Electric Winches

  • Description
  • More Details
  • Features Power-in, Power-out, controlled Freewheeling clutch and automatic brake.
    Available in 120 volt AC and 12 volt DC models.
  • SA models equipped with flexible high strength 7 x 19 galvanized aircraft cable (except SA9010AC).
  • All SA models will also accept 2" wide strap.
  • remote control kits are available.
  • Emergency crank handle is standard equipment.
  • Both AC & DC models now available with built in
    remote control. They feature a hand held 10' switch
    pendant cord and feature a dynamic brake.
    AC Models
  • 120 volt AC operation complete with 10 foot, 3 wire grounded power cord and built-in 3 position rocker switch.
  • Available with CSA NRTL/C approval, signifying the winch has been evaluated to applicable ANSI/UL and CSA standards for use in the U.S. & Canada. NRTL (Nationally Recognized Testing Laboratory) is designation granted by OSHA to laboratories which have been recognized to perform certification to U.S. standards.
  • 6349 Dual Switch Remote Control with dynamic brake feature is available factory installed or seperately.
  • Model SA9010AC is designed for davit applications
    in and near salt water environment. It includes
    SA9000AC less clutch (eliminates freewheeling) and
    cable. Power-in and Power-out only with stainless steel reel. Also includes GFCI breaker and 6349
    dynamic brake remote.
    DC Models
  • High-torque 12 volt DC motor has circuit-breaker overload protection.
  • StrongArm DC electric winches have a dynamic motor brake as well as a mechanical friction brake to securely hold the load.
  • DC models include wiring harness, 25 foot positive battery wire, and 8 foot ground wire.
  • Remote control available built in or as a kit.

D-L StrongArm® electric winches

MADE IN THE USA

Electric winch gear-train uses heat-treated sintered-iron gears for smooth, quiet operation.

  • Final drive gears are heat-treated high carbon steel for greater strength.
  • Precision needle bearings are used in high-load areas for low friction and longer life.
  • Die formed base is adapted for quick mounting applications.
  • Emergency crank handle is standard equipment. For all SA Models & TW9000.
  • Attractive brushed stainless steel front plate for superior rust resistance.
  • 1-piece high impact case provides excellent weather resistance and protection for internal components.
  • Hook safety snap keeps load securely attached.
  • MADE IN U.S.A.
Electric Winch Specifications Approximate Load Speed(ft./min.)
No Load Full Load
Model
Number
Volts / Amps Load Capacity ** Gear Ratio SA=Cable
TW=Strap
Pulley
Block
& Hook
Full Reel Empty Reel Full Reel Empty Reel Preview
Product
SA5000 12 Volt DC / 70 1500 lb/681 kg 194:1 3/16" x 20' (6360) 33 12 8 4
SA5000AC 120 Volt AC / 6 1200 lb/545 kg 194:1 3/16" x 20' (6360) 35 16 16 9
SA7000 12 Volt DC / 70 2200 lb/999 kg* 194:1 3/16" x 50' (6211) X 16 6 4.5 3.5
SA7000AC 120 Volt AC / 6 1800 lb/817 kg* 194:1 3/16" x 50' (6211) X 17.5 8 9.5 6
SA9000 12 Volt DC / 70 3000 lb/1362 kg 584:1 7/32" x 25' (6361) 11 5 4 2.5
SA9005
Same as SA9000 except less clutch with Remote Kit #6383
7/32" x 25' (6361)
SA9000AC 120 Volt AC / 6 2700 lb/1226 kg 584:1 7/32" x 25' (6361) 18 6 7 3.5
SA9010AC
Same as SA9000AC except less clutch and cable with stainless reel & GFCI in 10' cord and 6349 Dynamic Brake
SA12000 12 Volt DC / 70 4500 lb/2043 kg* 584:1 7/32" x 50' (6212) X 5 2.5 2 1.5
SA12000AC 120 Volt AC / 6 4000 lb/1816 kg* 584:1 7/32" x 50' (6212) X 9 3 4 2
TW4000 12 Volt DC / 40 1500 lb/681 kg 302:1 2" x 20' (6149) 22 11 8.2 4.4
TW9000 12 Volt DC / 70 3000 lb/1362 kg 584:1 2" x 25' (6250) 15 9 6.3 4.3